Notice: this part has been discontinued please use one of our other serial to Ethernet converters
The GW-7472 from ICP-DAS is a combined Ethernet to Modbus RTU Master and Modbus TCP Client Gateway. It will allow you to communicate between a Modbus RTU network and/or Modbus TCP network, and a Ethernet / IP network. It reads the data from the Modbus RTU slaves as well as Modbus TCP servers and transmits the data to the Ethernet/IP device. The data transmitted by the Ethernet/IP device is sent to the Modbus RTU slaves/Modbus TCP servers via the GW-7472.
In order to save the installation space, the GW-7472 has a small form factor which makes it easy to install in electrical enclosures, DIN rails or even directly attached to a serial device or embedded into a machine.
The GW-7472 features a powerful 32-bit MCU to handle network traffic efficiently. It features IEEE 802.3af-compliant (Class 1) Power over Ethernet (PoE) with a standard category 5 Ethernet cable. If no PoE is available the converter can be powered by an external DC power adapter. These two power interfaces are redundant. If one fails, the other will take over to make sure the converter is powered.
As you can see from the features and specifications below, the GW-7472 is an industrial grade Ethernet to Modbus converter with many advanced features and functions. It is very reliable and solid in design and the perfect choice for factory automation and industrial environments where reliability and performance is critical.
Overall features
- Handles both Modbus RTU and TCP data
- Powerful 32-bit MCU handles efficient network traffic
- Redundant power inputs: PoE and DC jack
- Industrial grade ruggedized design
- Fire retardant materials (UL94-V0 Level)
- Many advanced features and functions
- High performance and reliability ICP-DAS brand
- Indication LED lights
- Virtual COM management software included
|
Resources
|
| SPECIFICATIONS |
| Part number |
GW-7472 |
| Software management |
Windows 7, Vista, XP, 2000 |
| CPU |
32-bit MCU |
| Protocol (UART) |
Modbus RTU master |
| Serial connector |
10-Pin Removable Terminal Block x 1 |
| Serial signals |
RS485 2-wire: Data+, Data-, GND
RS422 4-wire: Tx+, Tx-, Rx+, Rx-, GND
|
| Ethernet |
10/100 Base-TX, 8-pin RJ-45 x 1, (Auto-negotiating, Auto-MDI/MDIX, LED indicator) PoE (IEEE 802.3af, Class 1) |
| Protocol (Ethernet) |
Ethernet/IP adapter and Modbus TCP client |
| RS485 Data Direction |
ADDC (Automatic Data Direction Control) |
| Baud rate |
1200 to 115200 bps |
| Parity |
None, Even, Odd |
| Data Bits |
7, 8 |
| Stop Bits |
1, 2 |
| Network Protocols |
ARP,TCP, UDP, ICMP, DHCP, BOOTP and TFTP protocols |
| Configuration Options |
Windows Utility |
| Magnetic Isolation Protection (Ethernet port) |
1.5 KV built-in |
| Power |
PoE: IEEE 802.3af, Class 1
DC jack: +12 ~ 48 VDC |
| Power Consumption |
0.05 A @ 24 VDC |
| Housing |
Plastic (fire retardant) |
| Mounting type |
DIN-Rail |
| Regulatory compliance |
- EMC: CE, FCC
- Fire Retardant Materials (UL94-V0 Level)
- RoHS
|
| Dimensions |
52mm x 95mm x 27mm (W x L x H) |
| Operating temperature |
-25 ~ 75 ? |
| Ambient Relative Humidity |
10 - 90% RH, non-condensing |
| Warranty |
1 year limited warranty |
For alternative serial to Ethernet solutions please see our full selection of serial Ethernet Converters.
RS232 to RS485 Converter
U.S. Converters LLC
