This product has been discontinued and
replaced
by part
US485COM which has
better performance and stability.
Compact USB to RS-485 converter cable with the chipset built into the USB connector. This design offers a convenient way of connecting your RS485 devices directly to the RS485 wires of this 485 converter cable or via the a two-piece screw terminal connector for easy disconnection.
The processor chip in this converter cable is the high performance FTDI chip which is compatible with all versions of Windows (32- and 64-bit), Mac and Linux.
Besides the RS485 D+, D- and GND signals this converter cable also provides an addtional +5VDC at the 485 end which can be used for powering your device if needed.
The cable itself is powered from the USB port so no additional external power supply is needed for this RS 485 converter to work.
After connecting and installing the drivers for this cable a virtual COM port is automatically created and will show up in your operating system's Device Manager just as if it was a real local COM port.
This USB to 485 converter is surge and static protected to protect against the most common damages from static electricity and other voltage spikes, which makes it suitable for most applications, including industrial, commercial and any general office environment.
Automatic send data control is enabled by default so no external flow or handshake control is needed.
Overall features
- USB port-powered
- Compact high performance solution
- Indication LED lights for TX, RX and Power
- Interface: Terminal header + stripped wires
- Automatic Send Control
- Up to 32 nodes in network configuration
|
Resources
|
| SPECIFICATIONS |
| Part number |
SN-060519 |
| Operating system |
- Windows 8.1 / 8 (32/64-bit), Windows Server 2012, Windows 7 (32/64-bit), Windows Server 2008 R2, Vista (32/64-bit), Windows Server 2008 (32/64-bit), XP, Windows Server 2003 (32/64-bit), 2000, (all WHQL compliant)
- Windows CE v4.2 - 5.2 and 6.0 which includes: Windows Mobile 2003, 2003 SE, Windows Mobile 5, 6, 6.1 and 6.5
- Linux
- Mac OS 8, OS 9, OS X
- Android
|
| Processor |
FTDI FT232RL |
| Unique chipID no. |
Yes, each converter has it own unique ID number which can be accessed by the user with the D2XX driver programmers guide. |
| RS485 Interface |
Included screw terminal header / single wires |
| Echo signal |
None |
| Fail-safe bias resistors |
Yes |
| USB interface |
Standard Type A Male |
| Ports |
1-port available for RS485 |
| Signals |
RS485, 2-wire half duplex: D+, D-, GND |
| Baud rate |
300-921,600bps (up to 3Mbps by using alising) |
| Parity |
None, Odd, Even, Mark, Space |
| Data Bits |
7, 8 |
| Stop Bits |
1, 2 |
| TX / RX buffer size |
256 Byte Transmit Buffer / 128 Byte Receive Buffer |
| Adjustable USB transfer sizes for TX and RX |
From 64 bytes to 4096 bytes |
| Adjustable latency timer |
1 to 255 msec |
| Adjustable read and write timeouts |
0 to 10000 msec |
| Flow Control |
None, Xon/Xoff, Hardware |
| COM port accessible by |
Included virtual COM port drivers or FTD2XX.DLL |
| Special features |
- Compatible with Modbus RTU/ASCII, BACnet
- Supports non-standard baud rates
- Automatic Send Control
|
| Electrostatic (ESD) protection |
600W surge protection, 15KV static electricity protection |
| Current draw |
Static: less than 80mA. Dynamic average: less than 150mA |
| Interface compliance |
USB1.1,2.0,3.0, EIA/TIA RS-232 |
| Regulatory compliance |
FCC, CE and RoHS |
| Working temp |
-20°C to 60°C |
| Cable length |
5 feet |
| Size |
50 x 8 x 18mm (USB part only) |
| Warranty |
1 year limited warranty |
For alternative USB to serial RS485 and RS422 solutions please see our full selection of USB to Serial RS485 converters
RS232 to RS485 Converter
U.S. Converters LLC
