This product has been discontinued and replaced by part number AX102.
Professional grade 2-port USB to RS422 / RS485 converter which is suitable for most applications, including industrial, commercial and any general office computer device.
It is a reliable and cost-effective converter that lets you connect any RS422 or RS485 device directly to your computers USB port.
The COM ports in this converter can be set as either 2 x RS485, 2 x RS422 or 1 x RS485 and 1 x RS422.
This converter is build around the high performance and solid processor chip FT232BL from FTDI Semiconductors which makes it fully compatible with Windows 7 and Windows 8 but it will also work perfectly with older versions of Windows, Linux and Mac.
||Windows 8 32/64, Windows 7 32/64, Vista 32/64,
XP 32/64, Server 2003/8R2 32/64, 2000, ME, 98Se, Mac 8/9/X, Linux, Android
|| USB1.1, 2.0, 3.0, EIA RS-485, RS-422
| USB signals
|| VCC, DATA+, DATA-, GND, FG
| RS-485 signals
|| D+, D, GND
| RS-422 signals
|| R+, R-, T+, T-, GND
| Working mode
|| Asynchronous, point to point, point to multi-point, half duplex
| Flow control
|| Automatic Send Data Control - no drivers needed
||Enabled for RS485
| Band rate
|| 0 - 3Mbps
| Transmission range
|| RS-485 / RS422: 4000 FT
USB: 16 feet
| ESD Protection
|| 600W surge protection, 15KV static electricity protection
| Serial connector
|| RS-485 / RS422 side DB-9male
| USB connector
|| USB side type A interface female
|| Static consumption less than 80mA, dynamic average consumption less than 150mA
|| 3.5 x 2.5 x 1.5 inch
For alternative USB to serial RS485 and RS422 solutions please see our full selection of USB to Serial RS485 converters