RS232 Repeater

The recommended maximum length for RS232 cables is 50 feet. These RS232 repeater / RS232 extender, also called line drivers, can extend your standard RS232 line up to 4000 feet.

These extenders work in pairs only, one is connected at each end of the RS232 line you wish to extend. They comunicate in full-duplex (they can send and receive at the same time) and converts the connected RS232 signal into RS422 and back again to R232.

These particular RS232 repeaters / RS232 extenders are suitable for most applications, including industrial, commercial and any general office computer device. They are bi-directional, (meaning they communicate in both directions), reliable and cost-effective extenders that easily lets you extend your RS232 line between two RS232 ports.

The extenders are powered from the RS232 port so no external power supply, flow control, drivers or any other external interference is needed, simply plug-and-play.

These extenders are used in pairs only, one unit at each end of your data line, so in order to establish a communiation link you will need to order two units.

Each RS232 Repeater / RS232 extender has a standard DB9 female connector on one side and a DB9 male connector on the other side, which allows for easy connection of and standard serial cable. Terminal headers for connecting individual wires are also included with each extender.

Optional: by using a DB9 to RJ45 adapter you can extend any serial RS232 signal by using a standard CAT5 cable.

• RS232 port powered, no need for external power supply
• Optional external power: 5 - 12VDC
• Supported lines: 5 (RXD, TXD, RTS, CTS, GND)
• Interface: DB9 EIA RS-232 standard
• Transfer rate: 300-115200bps
• Transfer distance: 4000FT
• 1500W surge and static protection
• Working temperature: -40 to 80C
• Size: 72 x 22 x 16mm
• CE, FCC, RoHS ISO 9001 Certified
• 5 year warranty