menu contact tech help download faq about Home

Bluetooth TTL Module via USB

Part: UTTBL2
$18.50 In stock
 
contact support
This module is a partly pre-assembled Bluetooth USB to TTL level module ready to connect to any microtroller such a ARM, DSP or Arduino. It easily enables you to integrate short range (up to 100 feet) wireless communication over Bluetooth with your application.
The module can be configured via the USB port by standard AT commands.

The Bluetooth module is included but not pre-soldered to the board.

Power levels are 3.3V and 5.0V so you can use this module for most serial TTL level devices such as micro processsors, adapters and most other electronics projects.

LED indication lights show data activity for the TX and RX lines, and the built-in reset button resets the board.

download data sheeet View Datasheet
usb to ttl converter

usb to ttl converter 2 usb to ttl converter 3usb bluetooth moduleusb bluetooth ttl board
Click images to enlarge

SPECIFICATIONS
Model number UTTBL2
Signals TXD, RXD, GND, 3.3V, 5V
Power levels 3.3V and 5.0V
Baud rate 300bps to 1Mbps
Data specs 5-8 bit data, 1-2 Stop bits, odd/even and no parity
Dimensions 32mm x 15mm excl USB connector

Price: $18.50
Part: UTTBL2
In stock




RSS Product Feed :: Bluetooth TTL Module via USB










405 W. Fairmont Drive
Tempe, AZ 85282, USA

Serial USB | RS232 | RS485 | RS422 Adapters
Copyright © 2006-2013 USconverters.com

Facebook Delicious Digg! Stumble-Upon
Your IP Address is: 54.234.180.187



ssl secure