USB to RS485 / RS422 Professional

$48.50 In stock

This is our high quality XetatroniX brand Pro grade USB to RS485 / RS422 adapter which is optimized for Windows Vista and Windows 7 but will of course also work perfectly fine with Windows 98, 2000 and XP. It is suitable for most applications, including industrial, commercial and any general office computer device. It is designed with a high performance quality processor chip which makes this USB to RS485 / USB to RS422 adapter one of the most reliable and professional USB to serial adapters on the market. It easily lets you connect any RS485 or RS422 device directly to your computer's USB port, without experiencing any troubles like computer freeze, IO problems or any other driver problems.
This USB to RS485 / USB to RS422 adapter is powered from the computer's USB port so no additional external power source is needed. The RS422 / RS485 end is a standard 9-pin D-sub connector with an optional screw terminal board included for easy connection of cables or single wires.
After installing the included drivers and connecting the cable to your computer's USB port, it will show up as a virtual serial COM port in Windows Device Manager where you can manage and configure it like it was a standard built-in serial COM port.
It is build around the high-end quality chip RS232BL from FTDI Semiconductors which is one of the best and most reliable USB to RS485 / USB to RS422 serial chips on the market, with a SP485E RS485 / RS422 transciever from Exar Corporation. Documentation is available in our download section.

Overall features
- Compatible with: Windows 7 32/64, Vista 32/64,
- Server 2003/8, XP 32/64, 2000, ME, 98Se
- Mac and Linux
- Indication LED's for Power, TX and RX
- No power supply needed, plug and play
- No IRQs, DMA or required. No IRQ Conflicts
- 3 feet (1 meter) cable
- Baud rate: 300bps to 1Mbps
- USB 1.1 and 2.0 compliant
- Automatic send data control
- Auto detection of data speed
- Zero delay automatic transmission
- Built-in static and surge protection up to 600W
- FCC, CE and RoHS approved
- 5 years warranty
- Terminal board included with each converter

Standard	USB1.1/2.0, EIA RS-485, RS-422 standard
USB signals	VCC, DATA+, DATA-, GND, FG
RS-485 signals	D+, D, GND
RS-422 signals	R+, R-, T+, T-, GND
Working format	Asynchronous, point to point, point to multi-point, half duplex
Flow control	Automatic Send Data Control - no drivers needed
Baud rate	300-921.600bps, automatic test signal rate
ESD Protection	600W surge protection, 15KV static electricity protection
Serial connector type	RS-485 / RS422 side DB-9 male or optional terminal block
USB connector	USB side type A interface female
Power consumption	Static consumption less than 80mA, dynamic average consumption less than 150mA
Dimensions	70mm x 35mm x 18mm