If you want to connect your serial RS232 device to your computer over WiFi then this Serial to WiFi adapter is what you need. It will let you connect a serial RS232 device to any secure or open wireless network or access point.
Data can be transferred over TCP/IP, UDP or HTTP with the advantage of using 802.11 b/g/n infrastructure or Adhoc mode (Simple AP / Station Mode) networking which allows you to use existing wireless WiFi network connectivity.
This Serial to WiFi adapter is designed around the BCM4390 processor from Broadcom which includes an ARM Cortex-M3 32-bit CPU, which ensures simple and reliable operation and a selection of features and available customized settings for your particular network and application.
The included USB cable can be used to power this adapter however a standard mini USB 110VAC/5VDC power supply adapter can also be used. Alternatively this serial to WiFi adapter can be powered by a 3.7 - 5.0VDC lithium battery or an external USB battery power pack. Lastly, the adapter can also be powered by 4.5 - 24VDC through the screw terminals on the side of the adapter or through pin 9 in the DB9 connector.
The parameters can be configured over WiFi by using any standard web browser.
Virtual COM port software for creating a virtual COM port can be downloaded for free for Windows. This adapter is also compatible with several 3rd party VCOM software.
This adapter is ideal for any home, office, laboratory or light industrial environment and will allow you to connect any serial device to your WiFi network under Windows, iOS, Android and most other mobile WiFi enabled applications.
Tested working with ASCOM drivers and most types of astronomy telescopes and software, see our Controlling a Telescope over WiFi setup guide for details.
||Virtual COM software available for Windows 10, 8, 7, Vista, XP, 2000 (32/64-bit)
Can also connect with Android and iOS (no virtual COM software)
ARM Cortex-M3 @48MHz, 32-bit CPU + WLAN CORE
Memory: 448KB RAM and 2MB flash
||IEEE 802.11 b/g/n
||2.412 - 2.484 GHz
||WPA TKIP, WPA AES, WPA2 TKIP, WPS2 AES
||ARP, IP, ICMP, UDP, TCP, DHCP, Modbus TCP RTU (RS485)
||Simple AP, Station, Dual (AP & Station) / Infrastructure, Ad-Hoc
|Max simultaneous clients
||UART in - network: 6Kb
network - UART out: 8Kb
|Minimum receiver sensitivity
|| Max. 360mA peak at 3.3V
||9600 to 921,600 bps
||None, even, odd
||Web browser over WiFi
||Up to 330 feet (100 meters)
||TX, RX, CTS, RTS, GND
||Hardware RTS/CTS, None
||1-port RS232 female D-sub 9-pin
||External 2dBi di-pole, SMA Female
|| 0C to +70C
|External battery option
||88 x 33 x 16 mm
||CE, FCC, ROHS
For alternative wireless serial solutions please see our full selection of wireless RS232 adapters.