Radio RS232 Wireless 1600 FT

Creating a Wireless RS232 link with RF radios

Establishing a wireless RS232 link using two RF radios is probably the easiest way of making a wireless RS232 link. If you use the default settings of the wireless RS232 radio you can simply connect one unit to your computer using a USB to serial cable and the other wireless RS232 radio to your serial device, connect the power supplies and the link is ready to use. No pairing or other configurations are required.
Most wireless RS232 radios communicate in the unlicensed radio frequency band (RF) at 900Mhz, 433Mhz or 2.3Ghz band. These bands can be used without a license so you do not have to worry about optaining a license to use these wireless RS232 radios.
These wireless RS232 radios can be configured for most typical serial settings. The included configuration software allows you to configure the baud rate, data bits and other port settings. Most of our wireless RS232 radios have up to 12 channels, which means that you can use up to 6 pairs of wireless RS232 radios at the same location without they interfere with each other. Each wireless RS232 pair is simply assigned a different frequency in the 433Mhz band with the included configuration software.
All our wireless RS232 radios are designed with the high performance SP232 serial driver and a CC1101 RF chipset, which makes these wireless RS232 units very reliable and compatible with most applications. Each wireless RS232 unit is shielded internally to protect surrounding equipment against interference and to protect each wireless RS232 radio against electro magnetic noise and radio frequencies from external interference.